I have two interfaces on my Linux box.
One physical (eth0) and one virtual (eth0:0).
From the LAN - telnet to 192.168.1.30 110 works but telnet to 192.168.1.31 110 fails
"unable to connect to remote host: Connection refused"
From the LAN - telnet to 192.168.1.30 25 does not work but telnet to 192.168.1.31 25 works
eth0:0 = 192.168.1.30
eth0 = 192.168.1.31
Zimbra 4.5.7 is sending out from the 10.31 ip address and listening on the 10.30 ip address.
127.0.0.1 localhost.localdomain localhost server01.mydomain.com server01
192.168.1.31 server01.mydomain.com server01
Is there a way to tell zimbra what ip to use?
Thanks for your help.