Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: Web Client Loading ... Forever

  1. #1
    Join Date
    Oct 2005
    Location
    San Francisco, CA
    Posts
    6
    Rep Power
    10

    Default Web Client Loading ... Forever

    I built on FC4 (make allclean and make) from the trunk and was able to use /zimbraAdmin and have a couple of issues:

    1. Web Client Loading ... Forever - when I use /zimbra, the web client keeps showing the 'Loading ...' message with the busy cursor. There isn't anything interesting in the log files to indicate what's going on. Anyone seen this problem?

    2. Web Client Debug Mode Not Working - I tried using ?debug=3 (and other numbers or t). The console doesn't show anything. Do I need to turn debugging on in the build?
    Last edited by kenny810; 09-08-2006 at 12:41 PM.

  2. #2
    Join Date
    Aug 2005
    Location
    San Mateo, CA
    Posts
    4,789
    Rep Power
    19

    Default

    There is nothing in the build too turn on. It should print to the debug window with debug=3. Did you look in the JS console?
    Looking for new beta users -> Co-Founder of Acompli. Previously worked at Zimbra (and Yahoo! & VMware) since 2005.

  3. #3
    Join Date
    Sep 2005
    Location
    Sunnyvale, CA
    Posts
    269
    Rep Power
    10

    Default

    I believe we now strip out debug println's for production builds so even with the debug window up, you wont see anything get printed.

    You'll have to append "?debug=1&mode=mjsf" to your URL to get this to work once again. And like kevin said, be sure to take a look at the JS console for any javascript errors.

    I would also suggest trying to load the client w/ IE if you have access to a window machine just to rule out anything weird w/ FF.
    Bugzilla - Wiki - Downloads - Before posting... Search!

  4. #4
    Join Date
    Oct 2005
    Location
    San Francisco, CA
    Posts
    6
    Rep Power
    10

    Default

    Thanks for the pointer to the JS console. I saw an error message there a while ago and never thought it could be so obstructive! Anyway, AjxMessageFormat constructor choked when it was passed an undefined parameter. It turns out quota message keys (quotaDescLimited and quotaDescUnimited) are missing in, ZimbraClient/WebRoot/js/zimbraMail/config/msgs/ZmMsg.properties.

    Adding these keys resolved the 'Loading ...' forever issue.

    However, the debugging with mode=mjsf doesn't work! According to its status display, my FF keeps spinning 'Transferring' and 'Waiting for ...'

  5. #5
    Join Date
    Sep 2005
    Location
    Sunnyvale, CA
    Posts
    269
    Rep Power
    10

    Default

    Strange..

    Sounds like you didnt sync completely? The error you are seeing was a somewhat recent checkin on mainline branch and there's no reason you should see that error.

    I would suggest trying to re-sync w/ CVS and redeploy the webclient (assuming this is what you initially did working off the trunk).
    Bugzilla - Wiki - Downloads - Before posting... Search!

  6. #6
    Join Date
    Aug 2006
    Posts
    10
    Rep Power
    9

    Default

    Quote Originally Posted by pshah
    Strange..

    Sounds like you didnt sync completely? The error you are seeing was a somewhat recent checkin on mainline branch and there's no reason you should see that error.

    I would suggest trying to re-sync w/ CVS and redeploy the webclient (assuming this is what you initially did working off the trunk).
    I am not sure if this is related or not. I started with 3.1 on CentOS 4.3 and later upgraded to 4.0. These are GA releases, not from the trunk. After the 4.0 upgrade, the system is very slow in sending emails and gets the message of "Work In Progress" regularly. I didn't have this problem with 3.1 release. At times, it takes nearly 1 minute just to send an email after I have pressed the "Send" button. I see similiar problem when I save a new appointment. This is the same for FF and IE. For other areas of the system, the response time is very fast.

    The is a properly sized server with 2Gig of RAM and a Dual Core AMD 64 CPU
    with ample amount of space. When I use the system monitor to see the utilization, CPU is under 2% and memory is only 530MB of the 2Gig.

    Today, I have upgraded to 4.01 hoping the new release will resolve the problem. Unfortunately, it didn't.

    Does anyone else face similiar problem?
    Attached Images Attached Images

  7. #7
    Join Date
    Sep 2005
    Posts
    135
    Rep Power
    10

    Default

    is the server on the local network?

    if not, are there latency issues with the remote network, or throughput issues on the local?

  8. #8
    Join Date
    Aug 2006
    Posts
    10
    Rep Power
    9

    Default

    Quote Originally Posted by adobrin
    is the server on the local network?

    if not, are there latency issues with the remote network, or throughput issues on the local?
    The server is on the DMZ with a public IP with no internal IP. FQDN is mail.imdclinic.com and the IP is 202.123.212.6. It is hosted in a dataceter with ample amount of bandwidth. Whether I connect to the web client on the server or remotely, the speed is the same for sending emails and adding appointments so I don't believe it is a bandwidth issue. The strange thing is that the server is very fast for everything except sending emails and adding appointments.

  9. #9
    Join Date
    Aug 2006
    Posts
    10
    Rep Power
    9

    Default

    Quote Originally Posted by mikechansf
    The server is on the DMZ with a public IP with no internal IP. FQDN is mail.imdclinic.com and the IP is 202.123.212.6. It is hosted in a dataceter with ample amount of bandwidth. Whether I connect to the web client on the server or remotely, the speed is the same for sending emails and adding appointments so I don't believe it is a bandwidth issue. The strange thing is that the server is very fast for everything except sending emails and adding appointments.
    Can someone help? I am exhausted on where to look and this "slowness" is really bothering the users and they are starting to complain. I don't see any obvious errors in the log?

  10. #10
    Join Date
    Sep 2005
    Posts
    135
    Rep Power
    10

    Default

    what else is the machine doing?

    does 'tomcat restart' as the zimbra user solve the problem, or temporarily solve it?

Similar Threads

  1. Replies: 12
    Last Post: 08-25-2010, 03:37 AM
  2. Zimbra fails after working for 2 weeks
    By Linsys in forum Administrators
    Replies: 10
    Last Post: 10-07-2008, 01:42 AM
  3. Problem after change the Web mail client port number
    By eugeneewe in forum Installation
    Replies: 2
    Last Post: 07-19-2007, 07:27 PM
  4. Need Help Troubleshooting Web Client Issues
    By soxfan in forum Administrators
    Replies: 2
    Last Post: 03-23-2007, 06:27 AM
  5. Moving Zimbra Web Client from one port to another.
    By oopstu in forum Administrators
    Replies: 2
    Last Post: 01-20-2007, 02:47 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •