Page 4 of 4 FirstFirst ... 234
Results 31 to 36 of 36

Thread: Ubuntu 7.04 (Feisty) Package

  1. #31
    Join Date
    Apr 2007
    Location
    San Jose, CA
    Posts
    17
    Rep Power
    8

    Default

    Quote Originally Posted by walter.80@osu.edu View Post
    Emil, thanks for following up. I am not sure at this time whether I am still having problems with the calendar and contacts. I wanted to post the suggestion to kill the evolution-data-server because the fixed the problem I had seeing calendars and contacts. I learned that this was my problem after I ran "/usr/lib/evolution/evolution-data-server-1.12" and found the error that "books" was already running.

    Anyway, I'll be putting the connector through its paces later in the week. In the meantime to answer your question, I compiled "evolution-zimbra-0.1.0.tar.gz" from sourceforge for my evolution 2.12.1. I got hints from various postings in the forums. I am running all this on Ubuntu Gutsy on an AMD64. thanks, mark
    Did you compile with logging enabled or disabled? If you are still having problems with contacts and calendars and you have logging enabled, can you please cut out the relevant parts from ~/.evolution/log/zimbra.log ?

  2. #32
    Join Date
    Apr 2008
    Posts
    5
    Rep Power
    7

    Default

    Quote Originally Posted by esoleyman View Post
    Did you compile with logging enabled or disabled? If you are still having problems with contacts and calendars and you have logging enabled, can you please cut out the relevant parts from ~/.evolution/log/zimbra.log ?
    Emil, I did not enable logging when I compiled. If I have problems, I will certainly recompile and post the results. At this time I am still trying to copy my local evolution calendar into the connector calendar. I am running into problems, but I think that it is because of limitations on the Zimbra side. I won't have time to explore this much more until late in the week.

    Let me know if I can help in any other way. I did write down the steps that I took to compile. Though it was just gleaned from various other postings, I could post it again. M<

  3. #33
    Join Date
    Apr 2007
    Location
    San Jose, CA
    Posts
    17
    Rep Power
    8

    Default

    Quote Originally Posted by walter.80@osu.edu View Post
    Emil, I did not enable logging when I compiled. If I have problems, I will certainly recompile and post the results. At this time I am still trying to copy my local evolution calendar into the connector calendar. I am running into problems, but I think that it is because of limitations on the Zimbra side. I won't have time to explore this much more until late in the week.

    Let me know if I can help in any other way. I did write down the steps that I took to compile. Though it was just gleaned from various other postings, I could post it again. M<
    The compilation steps aren't necessary. Let me know if you find anything else.

    Thanks again.

  4. #34
    Join Date
    Apr 2008
    Posts
    5
    Rep Power
    7

    Default

    Quote Originally Posted by esoleyman View Post
    The compilation steps aren't necessary. Let me know if you find anything else.

    Thanks again.
    Sorry, but the ~/.evolution/log directory does not exist. I went ahead and made the directory just it must be made manually. I am using an Ubuntu package for evolution. Perhaps the logging needs to be enable in Evolution? Sorry for the amateur questions/comments. M<

  5. #35
    Join Date
    Apr 2008
    Posts
    5
    Rep Power
    7

    Default memory problems for PalmIII sync

    Quote Originally Posted by walter.80@osu.edu View Post
    Sorry, but the ~/.evolution/log directory does not exist. I went ahead and made the directory just it must be made manually. I am using an Ubuntu package for evolution. Perhaps the logging needs to be enable in Evolution? Sorry for the amateur questions/comments. M<
    OK, now I do have problems.

    1. I tried to sync my PalmIII through evolution to my zimbra address book and zimbra calendar. My Palm is using a serial connected cradle. I am using gpilot. In both the addressbook and datebook cases the the hard drive starts "going crazy" and the palm eventually looses its connection with the desktop. It seems that there is a memory leak somewhere (if that is the right term). Here is a snippet from /var/log/messages:

    Apr 2 16:01:19 oak kernel: [8035802.295265] printk: 86 messages suppressed.
    Apr 2 16:01:20 oak kernel: [8035802.295272] tail invoked oom-killer: gfp_mask=0x201d2, order=0, oomkilladj=0
    Apr 2 16:01:20 oak kernel: [8035802.295274]
    Apr 2 16:01:20 oak kernel: [8035802.295275] Call Trace:
    Apr 2 16:01:20 oak kernel: [8035802.295302] [out_of_memory+694/816] out_of_memory+0x2b6/0x330
    Apr 2 16:01:20 oak kernel: [8035802.295311] [__alloc_pages+760/848] __alloc_pages+0x2f8/0x350
    Apr 2 16:01:20 oak kernel: [8035802.295321] [__do_page_cache_readahead+263/672] __do_page_cache_readahead+0x107/0x2a0
    Apr 2 16:01:20 oak kernel: [8035802.295331] [io_schedule+40/64] io_schedule+0x28/0x40
    Apr 2 16:01:20 oak kernel: [8035802.295337] [__wait_on_bit_lock+101/128] __wait_on_bit_lock+0x65/0x80
    Apr 2 16:01:20 oak kernel: [8035802.295344] [__lock_page+95/112] __lock_page+0x5f/0x70
    Apr 2 16:01:20 oak kernel: [8035802.295352] [filemap_nopage+568/752] filemap_nopage+0x238/0x2f0
    Apr 2 16:01:20 oak kernel: [8035802.295361] [__handle_mm_fault+452/2912] __handle_mm_fault+0x1c4/0xb60
    Apr 2 16:01:20 oak kernel: [8035802.295375] [do_page_fault+508/2160] do_page_fault+0x1fc/0x870
    Apr 2 16:01:20 oak kernel: [8035802.295389] [sys_newfstat+46/80] sys_newfstat+0x2e/0x50
    Apr 2 16:01:20 oak kernel: [8035802.295398] [error_exit+0/132] error_exit+0x0/0x84
    Apr 2 16:01:20 oak kernel: [8035802.295411]
    Apr 2 16:01:20 oak kernel: [8035802.295412] Mem-info:
    Apr 2 16:01:20 oak kernel: [8035802.295414] Node 0 DMA per-cpu:
    Apr 2 16:01:20 oak kernel: [8035802.295417] CPU 0: Hot: hi: 0, btch: 1 usd: 0 Cold: hi: 0, btch: 1 usd: 0
    Apr 2 16:01:20 oak kernel: [8035802.295419] CPU 1: Hot: hi: 0, btch: 1 usd: 0 Cold: hi: 0, btch: 1 usd: 0
    Apr 2 16:01:21 oak kernel: [8035802.295422] CPU 2: Hot: hi: 0, btch: 1 usd: 0 Cold: hi: 0, btch: 1 usd: 0
    Apr 2 16:01:21 oak kernel: [8035802.295425] CPU 3: Hot: hi: 0, btch: 1 usd: 0 Cold: hi: 0, btch: 1 usd: 0
    Apr 2 16:01:21 oak kernel: [8035802.295427] Node 0 DMA32 per-cpu:
    Apr 2 16:01:21 oak kernel: [8035802.295429] CPU 0: Hot: hi: 186, btch: 31 usd: 33 Cold: hi: 62, btch: 15 usd: 48
    Apr 2 16:01:21 oak kernel: [8035802.295432] CPU 1: Hot: hi: 186, btch: 31 usd: 15 Cold: hi: 62, btch: 15 usd: 14
    Apr 2 16:01:21 oak kernel: [8035802.295435] CPU 2: Hot: hi: 186, btch: 31 usd: 5 Cold: hi: 62, btch: 15 usd: 58
    Apr 2 16:01:21 oak kernel: [8035802.295438] CPU 3: Hot: hi: 186, btch: 31 usd: 31 Cold: hi: 62, btch: 15 usd: 33
    Apr 2 16:01:21 oak kernel: [8035802.295442] Active:240426 inactive:245125 dirty:0 writeback:0 unstable:0
    Apr 2 16:01:21 oak kernel: [8035802.295443] free:3429 slab:9924 mapped:49 pagetables:7453 bounce:0
    Apr 2 16:01:21 oak kernel: [8035802.295445] Node 0 DMA free:8024kB min:28kB low:32kB high:40kB active:2300kB inactive:1336kB present:11216kB pages_scanned:41540 all_unreclaimable? yes
    Apr 2 16:01:21 oak kernel: [8035802.295450] lowmem_reserve[]: 0 2003 2003
    Apr 2 16:01:21 oak kernel: [8035802.295452] Node 0 DMA32 free:5692kB min:5712kB low:7140kB high:8568kB active:959404kB inactive:979164kB present:2052080kB pages_scanned:4557187 all_unreclaimable? yes
    Apr 2 16:01:21 oak kernel: [8035802.295457] lowmem_reserve[]: 0 0 0
    Apr 2 16:01:21 oak kernel: [8035802.295460] Node 0 DMA: 0*4kB 1*8kB 1*16kB 0*32kB 1*64kB 0*128kB 1*256kB 1*512kB 1*1024kB 1*2048kB 1*4096kB = 8024kB
    Apr 2 16:01:21 oak kernel: [8035802.295467] Node 0 DMA32: 31*4kB 21*8kB 4*16kB 1*32kB 0*64kB 1*128kB 0*256kB 0*512kB 1*1024kB 0*2048kB 1*4096kB = 5636kB
    Apr 2 16:01:21 oak kernel: [8035802.295476] Swap cache: add 2496262, delete 2496266, find 22783301/23021205, race 2+2188
    Apr 2 16:01:21 oak kernel: [8035802.295478] Free swap = 0kB
    Apr 2 16:01:21 oak kernel: [8035802.295479] Total swap = 506036kB
    Apr 2 16:01:21 oak kernel: [8035802.295481] Free swap: 0kB
    Apr 2 16:01:21 oak kernel: [8035802.308959] 524227 pages of RAM
    Apr 2 16:01:21 oak kernel: [8035802.308963] 8567 reserved pages
    Apr 2 16:01:21 oak kernel: [8035802.308964] 11695 pages shared
    Apr 2 16:01:21 oak kernel: [8035802.308966] 4 pages swap cached
    Apr 2 16:01:21 oak kernel: [8035802.309173] dd invoked oom-killer: gfp_mask=0x201d2, order=0, oomkilladj=0
    Apr 2 16:01:21 oak kernel: [8035802.309175]
    .
    .
    .

    I ran evolution with "evolution --debug ~/.evolution/log/log1.txt" and got only the following:

    CalDAV Eplugin starting up ...
    evolution-shell-Message: Killing old version of evolution-data-server...
    (evolution:3806): e-data-server-DEBUG: Loading categories from "/home/walter/.evolution/categories.xml"
    (evolution:3806): e-data-server-DEBUG: Loaded 30 categories
    calendar-gui-Message: Check if default client matches (1171470022.9211.12@oak 1171470022.9211.12@oak)

    After the system "recovers itself." I see that some events did make it into the calendar. They are not all there and the recurring events are not correct. (At least the monthly recurring events become weekly recurring events.)

    When I tried to sync the address book, nothing got transferred. I ended up with the similar hard drive/memory problems. I did not have the evolution --debug activated when attempting to sync the address book.

    If anyone wants me to debug the connector, I would need explicit instructions. I do not know now to run trace or other debugging programs.

    I also tried copying a large (local) evolution calendar to a zimbra calendar. I did this by right clicking on the local calendar and selecting copy. It seems to just hang after a while. I do not think that I have the same memory problem as above. I have to kill evolution after this. I did not have evolution --debug running at the time. I actually let one of these copy exercises run overnight. As with the Palm sync attempts, some events were transferred ... but only a fraction of them. I have done a drag'n'drop of single events and that seemed to work fine.

    I would really like to move everything to zimbra and be able to sync directly. I am thinking of just importing the ics file in zimbra. However, I think that I will have the same problem with recurring events and I am not sure this will solve my sync problems. I am wondering if zimbra interprets the ics file with recurring events differently than evolution? Any other suggestions would be very welcome.

  6. #36
    Join Date
    Apr 2008
    Location
    France
    Posts
    48
    Rep Power
    7

    Default

    Quote Originally Posted by esoleyman View Post
    Hi everyone,

    I had a chance today to debug the connector and find out why the authentication problem is occurring. I found the answer I was looking for and created a patch against the codebase. I have also created a new package that will work for everyone as I have first tested it on my own desktop.

    Please download the new Ubuntu Feisty 7.04 package.
    Has anyone got this package as the blog is being migrated to another place ?

    Thank you

Similar Threads

  1. Ubuntu 7.04
    By Mike Oliveri in forum Installation
    Replies: 10
    Last Post: 08-04-2007, 04:19 PM
  2. Unable to install on Ubuntu 7.04 64 bit
    By geekneck in forum Installation
    Replies: 5
    Last Post: 07-16-2007, 07:52 PM
  3. Ubuntu 7.04 Feisty Fawn Guide
    By Dijital in forum Installation
    Replies: 6
    Last Post: 06-09-2007, 10:05 AM
  4. Zimbra on Ubuntu Feisty Fawn 7.04?
    By SnowPunk98 in forum Installation
    Replies: 11
    Last Post: 04-19-2007, 07:14 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •