Results 1 to 2 of 2

Thread: [SOLVED] GetServiceStatusRequest going to a non configured ip.

Hybrid View

  1. #1
    Join Date
    Nov 2010
    Posts
    4
    Rep Power
    4

    Default [SOLVED] GetServiceStatusRequest going to a non configured ip.

    Hi All,

    This is my first post and ofcourse it is a question.

    My server stats are not working and in my log file I see the following.

    2010-11-16 19:35:59,122 INFO [btpool0-6://192.168.1.1:7071/service/admin/soap/GetServiceStatusRequest] [name=paul@xxxxxx.xx;mid=3;ip=212.203.23x.xx;ua=Zim braWebClient - IE8 (Win);] soap - GetServiceStatusRequest

    No I am puzzeld why that is as there is no 192.xxx.xxx.xxx configured on my system.

    Code:
    eth0      Link encap:Ethernet  HWaddr 00:50:56:b7:0b:c8
              inet addr:212.203.23x.xx  Bcast:212.203.23x.xx  Mask:255.255.2xx.xxx
              inet6 addr: fe80::250:56ff:feb7:bc8/64 Scope:Link
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:1649 errors:0 dropped:0 overruns:0 frame:0
              TX packets:1562 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000
              RX bytes:195910 (195.9 KB)  TX bytes:728821 (728.8 KB)
    
    lo        Link encap:Local Loopback
              inet addr:127.0.0.1  Mask:255.0.0.0
              inet6 addr: ::1/128 Scope:Host
              UP LOOPBACK RUNNING  MTU:16436  Metric:1
              RX packets:11346 errors:0 dropped:0 overruns:0 frame:0
              TX packets:11346 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:0
              RX bytes:6415248 (6.4 MB)  TX bytes:6415248 (6.4 MB)
    The only value in zmlocalconfig is the following.
    Code:
    root@zimbra:/opt/zimbra/conf# /opt/zimbra/bin/zmlocalconfig -x | grep 192
    nio_imap_write_chunk_size = 8192
    I have anonymized my ip address and hostname but you get the picture.

    Can anyone give my some pointers on where this is configured?

    Thnx.
    Paul

  2. #2
    Join Date
    Nov 2010
    Posts
    4
    Rep Power
    4

    Default

    Never mind this is a non issue.
    As the admin port 7071 is not directly reacheble I have to tunnel to it. That causes my request to come from 192.168.1.1.

    Paul

    Quote Originally Posted by pjanzen View Post
    Hi All,

    This is my first post and ofcourse it is a question.

    My server stats are not working and in my log file I see the following.

    2010-11-16 19:35:59,122 INFO [btpool0-6://192.168.1.1:7071/service/admin/soap/GetServiceStatusRequest] [name=paul@xxxxxx.xx;mid=3;ip=212.203.23x.xx;ua=Zim braWebClient - IE8 (Win);] soap - GetServiceStatusRequest

    No I am puzzeld why that is as there is no 192.xxx.xxx.xxx configured on my system.

    Code:
    eth0      Link encap:Ethernet  HWaddr 00:50:56:b7:0b:c8
              inet addr:212.203.23x.xx  Bcast:212.203.23x.xx  Mask:255.255.2xx.xxx
              inet6 addr: fe80::250:56ff:feb7:bc8/64 Scope:Link
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:1649 errors:0 dropped:0 overruns:0 frame:0
              TX packets:1562 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000
              RX bytes:195910 (195.9 KB)  TX bytes:728821 (728.8 KB)
    
    lo        Link encap:Local Loopback
              inet addr:127.0.0.1  Mask:255.0.0.0
              inet6 addr: ::1/128 Scope:Host
              UP LOOPBACK RUNNING  MTU:16436  Metric:1
              RX packets:11346 errors:0 dropped:0 overruns:0 frame:0
              TX packets:11346 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:0
              RX bytes:6415248 (6.4 MB)  TX bytes:6415248 (6.4 MB)
    The only value in zmlocalconfig is the following.
    Code:
    root@zimbra:/opt/zimbra/conf# /opt/zimbra/bin/zmlocalconfig -x | grep 192
    nio_imap_write_chunk_size = 8192
    I have anonymized my ip address and hostname but you get the picture.

    Can anyone give my some pointers on where this is configured?

    Thnx.
    Paul

Similar Threads

  1. Replies: 32
    Last Post: 03-18-2011, 11:03 AM
  2. zmclamdctl is not running after upgrade
    By Darren in forum Installation
    Replies: 24
    Last Post: 10-10-2008, 09:10 AM
  3. Binding zimbra ldap to a specific ip
    By carnold in forum Administrators
    Replies: 1
    Last Post: 11-08-2007, 12:06 PM
  4. Upgrade, spam and conversations
    By Storm16 in forum Administrators
    Replies: 22
    Last Post: 04-02-2007, 04:08 AM
  5. 3.0 to 4.5.3 Upgrade failed (mysql error)
    By dealt in forum Installation
    Replies: 35
    Last Post: 03-19-2007, 10:30 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •