Page 1 of 2 12 LastLast
Results 1 to 10 of 23

Thread: DNS Questions and Trouble Installing

Hybrid View

  1. #1
    Join Date
    Jan 2008
    Posts
    18
    Rep Power
    7

    Default DNS Questions and Trouble Installing

    Hi, I'm trying to install Zimbra onto a sled 9 distro, but I'm rather new to working with DNS and the sort, and linux in general, so I had a few questions.

    So I was reading up in the wiki on how to install on sles 9
    (SUSE Linux Enterpise Server 9 NAT HOWTO - Zimbra :: Wiki)

    but I'm unclear on some of the information. I have set up a DNS, with host "sbs" and domain "sbstest.com" (not registered), but when installing the Zimbra client, it tells me:

    DNS ERROR resolving MX for sbs.sbstests.com
    It is suggested that the domain name have and MX configured in the DNS
    Change domain name? [Yes]

    But I input no because I don't know what to change it too.
    With that, I don't think my installation worked because I went to http://ip:7780 and nothing showed up. Any suggestions, or could someone point me in the right direction as how to setup and register my domain on my box?

    Also, another question is, does the domain name have to be registered?

    Thanks
    Last edited by smurraysb; 01-23-2008 at 12:41 PM.

  2. #2
    Join Date
    May 2006
    Location
    USA
    Posts
    6,242
    Rep Power
    21

    Default

    Welcome to the forums,

    It grabbed the servername as part of the domain from the box.
    As you can see you can try just sbstests.com or continue on and make a sbstest.com domain later after the setup finishes.

    From the server post the output of:
    Code:
     dig any sbstest.com
    http://ip:7780 is a little wrong for the admin console...or did you change the web port from 80 > 7780?
    Admin console gui is at: https://ip:7071
    Make sure you have no firewall or these ports open Ports - Zimbra :: Wiki & Firewall Configuration - Zimbra :: Wiki

    This FOSS or NE/NE trial?
    You might want to use a different operating system platform though...no sense installing 4.5.x when you can do 5.0.1
    List of supported platforms for 5.0.x is here: Zimbra Product Portal -Release 5.0

    NE downloads: /products/downloads.html
    FOSS downloads: /community/downloads.html

    NE Docs: /products/documentation.html
    FOSS Docs: /community/documentation.html

  3. #3
    Join Date
    Jan 2008
    Posts
    18
    Rep Power
    7

    Default

    Thank you for your reply!

    I'm not sure what you mean by servername, but the domain name for the box is sbstests.com (being unexperienced as I am, thats what I put as the domain when setting up the box)

    So I tried out that piece of code, and this is what I got in return, I'm not exactly sure what it all means.

    ; <<>> DiG 9.3.4 <<>> any sbstests.com
    ;; global options: printcmd
    ;; Got answer:
    ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 45866
    ;; flags: qr aa rd ra; QUERY: 1, ANSWER: 3, AUTHORITY: 0, ADDITIONAL: 1

    ;; QUESTION SECTION:
    ;sbstests.com. IN ANY

    ;; ANSWER SECTION:
    sbstests.com. 86400 IN SOA sbstests.com. postmaster.sbstests.com. 2008012348 10800 3600 604800 86400
    sbstests.com. 86400 IN NS sbstests.com.
    sbstests.com. 86400 IN MX 10 sbs.sbstests.com.

    ;; ADDITIONAL SECTION:
    sbs.sbstests.com. 86400 IN A **my ip**

    ;; Query time: 20 msec
    ;; SERVER: 127.0.0.1#53(127.0.0.1)
    ;; WHEN: Wed Jan 23 14:25:36 2008
    ;; MSG SIZE rcvd: 127

    Also, I was wondering if the DN needs to be a registered domain name, or is can Zimbra just run off a NAT connection?

    I tried that 7071 port, but I think the install didn't work, so that's why it's a no go.

    Sadley, I can't change platforms until this server is upgraded to another service pack, so I have to keep it to sled 9, which 4.5 only seems to support.
    Last edited by smurraysb; 01-23-2008 at 02:53 PM.

  4. #4
    Join Date
    May 2006
    Location
    USA
    Posts
    6,242
    Rep Power
    21

    Default

    It can run behind a NAT though you might need a Split DNS - Zimbra :: Wiki another good article is: /blog/archives/2007/06/making_zimbra_bind_work_together_1.html
    To test your domain externally a good utility is Pingability.com - Quick Check : sbstests.com
    (Your /etc/hosts file would be good to post)

  5. #5
    Join Date
    Jan 2008
    Posts
    18
    Rep Power
    7

    Default

    Thank you again for your reply

    I'll read up on those two docs, and I'll post what happens. Until then, I'll post my hosts file

    #
    # hosts This file describes a number of hostname-to-address
    # mappings for the TCP/IP subsystem. It is mostly
    # used at boot time, when no name servers are running.
    # On small systems, this file can be used instead of a
    # "named" name server.
    # Syntax:
    #
    # IP-Address Full-Qualified-Hostname Short-Hostname
    #

    127.0.0.1 localhost

    # special IPv6 addresses
    ::1 localhost ipv6-localhost ipv6-loopback

    fe00::0 ipv6-localnet

    ff00::0 ipv6-mcastprefix
    ff02::1 ipv6-allnodes
    ff02::2 ipv6-allrouters
    ff02::3 ipv6-allhosts
    127.0.0.2
    **my_ip** sbs.sbstests.com sbs

  6. #6
    Join Date
    May 2006
    Location
    USA
    Posts
    6,242
    Rep Power
    21

    Default

    You can comment out everything below the 'special IPv6' with a # symbol if desired.

    So the file should look like:
    127.0.0.1 locahhost.localdomain localhost
    serverIPHere server.domain.com server
    You can look in /etc/hostname to find server's hostname, or run this command:
    host `hostname`
    (backticks -next to the 1 key- not single quotes)

  7. #7
    Join Date
    Aug 2007
    Location
    Trinidad
    Posts
    416
    Rep Power
    8

    Default

    hey check my thread here

    http://www.zimbra.com/forums/install...tallation.html

    its long.. but i eventually got it to work.. and now i can do installs without any issues

  8. #8
    Join Date
    Jan 2008
    Posts
    18
    Rep Power
    7

    Default

    Thank you for your post.

    I read through the thread, and though it does have a lot of information, I'm still a bit in the dark about accessing any management or user interface tools. I think the install is working correctly, but I can't really tell unless I can actually use some tool that is provided by zimbra, so that I can see if it's successful or not.

  9. #9
    Join Date
    Jan 2008
    Posts
    18
    Rep Power
    7

    Default

    Okay, sorry for the long time without any reply. So, as of now, I am able to actually get a complete install, all the way through to the "starting servers"

    But I still don't know how to get to a GUI. I've tried the https://ip:7071 but to no avail. I'm not sure if this would be becuase of a port conflict on port 80 during installation. If it is, does the GUI address get changed, or is it resolved some how?

    Thank you for your time!

  10. #10
    Join Date
    Jan 2008
    Posts
    18
    Rep Power
    7

    Default

    Also, if it helps, here is my zmsetup.log output. It seems it's having troubles connecting to the MySQL server, which I'm not entirely sure why that is.

    Code:
    Getting installed packages
    checking isEnabled zimbra-core
    zimbra-core not in enabled cache
    enabled packages 
    Newinstall enabling all installed packages
    Enabling zimbra-core
    Enabling zimbra-ldap
    Enabling zimbra-store
    Enabling zimbra-mta
    Enabling zimbra-snmp
    Enabling zimbra-logger
    Enabling zimbra-apache
    Enabling zimbra-spell
    Setting defaults...
    Setting local config zimbra_java_home to /opt/zimbra/java
    *** Running as zimbra user: /opt/zimbra/bin/zmlocalconfig -f -e zimbra_java_home='/opt/zimbra/java'
    checking isEnabled zimbra-store
    zimbra-store is enabled
    checking isEnabled zimbra-ldap
    zimbra-ldap is enabled
    checking isEnabled zimbra-store
    zimbra-store is enabled
    
    
    DNS ERROR resolving MX for mail.sbstests.com
    It is suggested that the domain name have an MX record configured in DNS
    checking isEnabled zimbra-mta
    zimbra-mta is enabled
    	MX: mail.sbstests.com (192.168.61.131)
    
    	Interface: 192.168.61.131
    	Interface: 127.0.0.1
    Done
    checking isEnabled zimbra-ldap
    zimbra-ldap is enabled
    checking isEnabled zimbra-store
    zimbra-store is enabled
    checking isEnabled zimbra-mta
    zimbra-mta is enabled
    checking isEnabled zimbra-mta
    zimbra-mta is enabled
    checking isEnabled zimbra-spell
    zimbra-spell is enabled
    Checking for port conflicts
    checking isEnabled zimbra-store
    zimbra-store is enabled
    Port conflict detected: 80 (zimbra-store)
    checking isEnabled zimbra-ldap
    zimbra-ldap is enabled
    checking isEnabled zimbra-store
    zimbra-store is enabled
    checking isEnabled zimbra-logger
    zimbra-logger is enabled
    checking isEnabled zimbra-mta
    zimbra-mta is enabled
    checking isEnabled zimbra-ldap
    zimbra-ldap is enabled
    checking isEnabled zimbra-store
    zimbra-store is enabled
    Global config attribute retrieved from ldap: zimbraSpamIsSpamAccount=
    Global config attribute retrieved from ldap: zimbraSpamIsNotSpamAccount=
    Global config attribute retrieved from ldap: zimbraNotebookAccount=
    checking isEnabled zimbra-mta
    zimbra-mta is enabled
    checking isEnabled zimbra-snmp
    zimbra-snmp is enabled
    checking isEnabled zimbra-spell
    zimbra-spell is enabled
    checking isEnabled zimbra-store
    zimbra-store is enabled
    checking isEnabled zimbra-store
    zimbra-store is enabled
    checking isEnabled zimbra-store
    zimbra-store is enabled
    checking isEnabled zimbra-ldap
    zimbra-ldap is enabled
    checking isEnabled zimbra-store
    zimbra-store is enabled
    checking isEnabled zimbra-mta
    zimbra-mta is enabled
    checking isEnabled zimbra-snmp
    zimbra-snmp is enabled
    checking isEnabled zimbra-spell
    zimbra-spell is enabled
    checking isEnabled zimbra-ldap
    zimbra-ldap is enabled
    checking isEnabled zimbra-store
    zimbra-store is enabled
    checking isEnabled zimbra-mta
    zimbra-mta is enabled
    checking isEnabled zimbra-snmp
    zimbra-snmp is enabled
    checking isEnabled zimbra-spell
    zimbra-spell is enabled
    checking isEnabled zimbra-ldap
    zimbra-ldap is enabled
    checking isEnabled zimbra-store
    zimbra-store is enabled
    checking isEnabled zimbra-mta
    zimbra-mta is enabled
    checking isEnabled zimbra-snmp
    zimbra-snmp is enabled
    checking isEnabled zimbra-spell
    zimbra-spell is enabled
    checking isEnabled zimbra-ldap
    zimbra-ldap is enabled
    checking isEnabled zimbra-store
    zimbra-store is enabled
    checking isEnabled zimbra-mta
    zimbra-mta is enabled
    checking isEnabled zimbra-snmp
    zimbra-snmp is enabled
    checking isEnabled zimbra-spell
    zimbra-spell is enabled
    Saving config in /opt/zimbra/config.8084...
    Done
    Operations logged to /tmp/zmsetup.log.8084
    Setting local config values...
    Setting local config zimbra_server_hostname to mail.sbstests.com
    *** Running as zimbra user: /opt/zimbra/bin/zmlocalconfig -f -e zimbra_server_hostname='mail.sbstests.com'
    Setting local config ldap_master_url to ldap://mail.sbstests.com:389
    *** Running as zimbra user: /opt/zimbra/bin/zmlocalconfig -f -e ldap_master_url='ldap://mail.sbstests.com:389'
    Setting local config ldap_url to ldap://mail.sbstests.com:389
    *** Running as zimbra user: /opt/zimbra/bin/zmlocalconfig -f -e ldap_url='ldap://mail.sbstests.com:389'
    Setting local config ldap_port to 389
    *** Running as zimbra user: /opt/zimbra/bin/zmlocalconfig -f -e ldap_port='389'
    Setting local config ldap_host to mail.sbstests.com
    *** Running as zimbra user: /opt/zimbra/bin/zmlocalconfig -f -e ldap_host='mail.sbstests.com'
    Setting local config zimbra_uid to 500
    *** Running as zimbra user: /opt/zimbra/bin/zmlocalconfig -f -e zimbra_uid='500'
    Setting local config zimbra_gid to 1000
    *** Running as zimbra user: /opt/zimbra/bin/zmlocalconfig -f -e zimbra_gid='1000'
    Setting local config zimbra_user to zimbra
    *** Running as zimbra user: /opt/zimbra/bin/zmlocalconfig -f -e zimbra_user='zimbra'
    Setting local config tomcat_truststore_password to changeit
    *** Running as zimbra user: /opt/zimbra/bin/zmlocalconfig -f -e tomcat_truststore_password='changeit'
    Setting local config tomcat_keystore_password to qnyFWTLILh
    *** Running as zimbra user: /opt/zimbra/bin/zmlocalconfig -f -e tomcat_keystore_password='qnyFWTLILh'
    Setting local config av_notify_user to admin@sbstests.com
    *** Running as zimbra user: /opt/zimbra/bin/zmlocalconfig -f -e av_notify_user='admin@sbstests.com'
    Setting local config ssl_allow_untrusted_certs to TRUE
    *** Running as zimbra user: /opt/zimbra/bin/zmlocalconfig -f -e ssl_allow_untrusted_certs='TRUE'
    Setting local config mysql_memory_percent to 30
    *** Running as zimbra user: /opt/zimbra/bin/zmlocalconfig -f -e mysql_memory_percent='30'
    Setting local config tomcat_java_heap_memory_percent to 40
    *** Running as zimbra user: /opt/zimbra/bin/zmlocalconfig -f -e tomcat_java_heap_memory_percent='40'
    Done
    Setting up CA...
    *** Running as zimbra user: cd /opt/zimbra; zmcreateca
    ** Creating CA private key
    
    Generating a 1024 bit RSA private key
    ............................................................................................++++++
    .............................................................++++++
    unable to write 'random state'
    writing new private key to '/opt/zimbra/ssl/ssl/ca/ca.key'
    -----
    ** Creating CA cert
    
    Signature ok
    subject=/C=US/ST=N/A/L=N/A/O=Zimbra Collaboration Suite
    Getting Private key
    unable to write 'random state'
    Done
    Creating SSL certificate...
    checking isEnabled zimbra-store
    zimbra-store is enabled
    *** Running as zimbra user: cd /opt/zimbra; zmcreatecert
    ** Importing CA
    
    Certificate was added to keystore
    ** Creating keystore
    
    ** Creating server cert request
    
    Generating a 1024 bit RSA private key
    .++++++
    .++++++
    unable to write 'random state'
    writing new private key to '/opt/zimbra/ssl/ssl/server/server.key'
    -----
    ** Signing cert request
    
    Using configuration from /opt/zimbra/ssl/ssl/zmssl.cnf
    Check that the request matches the signature
    Signature ok
    Certificate Details:
            Serial Number:
                12:04:27:66:04
            Validity
                Not Before: Feb 29 09:16:52 2008 GMT
                Not After : Feb 28 09:16:52 2009 GMT
            Subject:
                countryName               = US
                stateOrProvinceName       = N/A
                organizationName          = Zimbra Collaboration Suite
                commonName                = mail.sbstests.com
            X509v3 extensions:
                X509v3 Basic Constraints: 
                    CA:FALSE
                Netscape Comment: 
                    OpenSSL Generated Certificate
                X509v3 Subject Key Identifier: 
                    21:B7:0C:A4:2C:2C:37:CA:1D:59:4D:AA:52:51:AA:CC:A2:0A:DB:F9
                X509v3 Authority Key Identifier: 
                    DirName:/C=US/ST=N/A/L=N/A/O=Zimbra Collaboration Suite
                    serial:00
    
                X509v3 Key Usage: 
                    Digital Signature, Non Repudiation, Key Encipherment
    Certificate is to be certified until Feb 28 09:16:52 2009 GMT (365 days)
    
    Write out database with 1 new entries
    Data Base Updated
    unable to write 'random state'
    Signature ok
    subject=/C=US/ST=NA/L=NA/O=Zimbra/OU=Zimbra/CN=mail.sbstests.com
    Getting CA Private Key
    unable to write 'random state'
    checking isEnabled zimbra-ldap
    zimbra-ldap is enabled
    checking isEnabled zimbra-mta
    zimbra-mta is enabled
    *** Running as zimbra user: cd /opt/zimbra; zmcreatecert
    ** Importing CA
    
    Certificate was added to keystore
    ** Creating keystore
    
    ** Creating server cert request
    
    Generating a 1024 bit RSA private key
    ..................++++++
    ...............++++++
    unable to write 'random state'
    writing new private key to '/opt/zimbra/ssl/ssl/server/server.key'
    -----
    ** Signing cert request
    
    Using configuration from /opt/zimbra/ssl/ssl/zmssl.cnf
    Check that the request matches the signature
    Signature ok
    Certificate Details:
            Serial Number:
                12:04:27:66:13
            Validity
                Not Before: Feb 29 09:16:56 2008 GMT
                Not After : Feb 28 09:16:56 2009 GMT
            Subject:
                countryName               = US
                stateOrProvinceName       = N/A
                organizationName          = Zimbra Collaboration Suite
                commonName                = mail.sbstests.com
            X509v3 extensions:
                X509v3 Basic Constraints: 
                    CA:FALSE
                Netscape Comment: 
                    OpenSSL Generated Certificate
                X509v3 Subject Key Identifier: 
                    DA:DD:74:63:07:BB:04:58:DF:7A:D3:17:F6:8B:89:57:1A:71:21:23
                X509v3 Authority Key Identifier: 
                    DirName:/C=US/ST=N/A/L=N/A/O=Zimbra Collaboration Suite
                    serial:00
    
                X509v3 Key Usage: 
                    Digital Signature, Non Repudiation, Key Encipherment
    Certificate is to be certified until Feb 28 09:16:56 2009 GMT (365 days)
    
    Write out database with 1 new entries
    Data Base Updated
    unable to write 'random state'
    Signature ok
    subject=/C=US/ST=NA/L=NA/O=Zimbra/OU=Zimbra/CN=mail.sbstests.com
    Getting CA Private Key
    unable to write 'random state'
    Done
    checking isEnabled zimbra-ldap
    zimbra-ldap is enabled
    Initializing ldap...
    *** Running as zimbra user: /opt/zimbra/libexec/zmldapinit
    Done
    checking isEnabled zimbra-ldap
    zimbra-ldap is enabled
    Saving CA in ldap...
    *** Running as zimbra user: /opt/zimbra/bin/zmprov -l mcf zimbraCertAuthorityCertSelfSigned "-----BEGIN TRUSTED CERTIFICATE-----
    MIICCzCCAXQCAQAwDQYJKoZIhvcNAQEEBQAwTjELMAkGA1UEBhMCVVMxDDAKBgNV
    BAgTA04vQTEMMAoGA1UEBxMDTi9BMSMwIQYDVQQKExpaaW1icmEgQ29sbGFib3Jh
    dGlvbiBTdWl0ZTAeFw0wODAyMjkwOTE2NDNaFw0wOTAyMjgwOTE2NDNaME4xCzAJ
    BgNVBAYTAlVTMQwwCgYDVQQIEwNOL0ExDDAKBgNVBAcTA04vQTEjMCEGA1UEChMa
    WmltYnJhIENvbGxhYm9yYXRpb24gU3VpdGUwgZ8wDQYJKoZIhvcNAQEBBQADgY0A
    MIGJAoGBAK11Vpi7RDDE7BkBOsljydT7WwMMV/vy8TahtqLAPcOMW0ggF0pDLhUV
    /1GlbpHL/NhQiB1rHPWAnML//OpVDfk5ooyiWJ0O8QD5LSyCNbcl+tJqCisgmsNg
    TvijeFmnjS1xdCtwM6awQYDPTh0N5UkKHOW8YUZSvBlRUyXVDH8FAgMBAAEwDQYJ
    KoZIhvcNAQEEBQADgYEAjx99wZtHBnMR4IhvafoJ9RtsD6Vycy69rsSlkh09sIjT
    dVlnsvCku4pD5yXdEJ6DWXSZfcJ962iiDdQYs2lldUBQtduEkh1MDN0PfhIKTCsM
    ElMXtOrEnjkDzX0Y9OltkPnwuUZUrPAWmTHa5fsNUBD/RFXSzlwqdPtWlFRf744=
    -----END TRUSTED CERTIFICATE-----"
    *** Running as zimbra user: /opt/zimbra/bin/zmprov -l mcf zimbraCertAuthorityKeySelfSigned "-----BEGIN RSA PRIVATE KEY-----
    MIICXgIBAAKBgQCtdVaYu0QwxOwZATrJY8nU+1sDDFf78vE2obaiwD3DjFtIIBdK
    Qy4VFf9RpW6Ry/zYUIgdaxz1gJzC//zqVQ35OaKMolidDvEA+S0sgjW3JfrSagor
    IJrDYE74o3hZp40tcXQrcDOmsEGAz04dDeVJChzlvGFGUrwZUVMl1Qx/BQIDAQAB
    AoGAUQIeyj+TDi+5j8f6O3mmFhi5nYfTQ3BnZLtLf2DGt5/CNcH+/oi3adOXJPtc
    0yxwTln1579Ri/pfu9YvuQS1/C0jgF53emblpiS/LgiuSIj6l3nPsd3AaRGLzk4w
    dT509MPrCRoyHQ3vRRi8cL41b9cHjzSUK2J45tgN9zS/u8ECQQDXvUa/koOg6h7y
    7OzpdOnNKgk07Ea5LP5A9WucGaF909DBYR7XrrfgJ4VxVC7bbQ47wEztsr0p3Tvo
    G0Zji+FRAkEAzdQhdd/g6zZBv4vpcpfsyzOyLYEGtbbmGjtmSUw9Ta3+Tu932MD1
    vOt+dSPuU1bMSY/CFUFCVeAZogU8ALz1dQJBAIlC2t2OOYNLEg/bYEyU3yByy1LJ
    taGhl876ltHFmPL2rk4rHbV6a3EJlCRrvDhNpY2spwVhAGu/X5sop1s0p1ECQQCq
    Vt1eLOp6HkvpVsPbN0obnOvfZsGDzxq9KN1s2bB+QfmNn/biJkb4kzfzf8nzpIiq
    dFOdvYVFhpIQGR7gSYElAkEAs0Mo+Q9iZAEbliWcxdks/a+CxlbKjujrJlt/WOWQ
    2WVXg37/k0D7zHnqZgyFQ2IlqRvYrj666pxKl+MAXEIkyQ==
    -----END RSA PRIVATE KEY-----"
    Done
    checking isEnabled zimbra-store
    zimbra-store is enabled
    Installing SSL certificate...
    checking isEnabled zimbra-store
    zimbra-store is enabled
    checking isEnabled zimbra-mta
    zimbra-mta is enabled
    *** Running as zimbra user: cd /opt/zimbra; zmcertinstall mta /opt/zimbra/ssl/ssl/server/server.crt /opt/zimbra/ssl/ssl/server/server.key
    ** Importing server cert
    
    Done
    checking isEnabled zimbra-ldap
    zimbra-ldap is enabled
    Creating server entry for mail.sbstests.com...
    *** Running as zimbra user: /opt/zimbra/bin/zmprov -l cs mail.sbstests.com
    d1904a92-8537-4140-bf52-860938300483
    Done
    checking isEnabled zimbra-store
    zimbra-store is enabled
    Setting spell check URL...
    *** Running as zimbra user: /opt/zimbra/bin/zmprov -l ms mail.sbstests.com zimbraSpellCheckURL http://mail.sbstests.com:7780/aspell.php
    Done
    Setting service ports on mail.sbstests.com...
    *** Running as zimbra user: /opt/zimbra/bin/zmprov -l ms mail.sbstests.com zimbraImapBindPort 143 zimbraImapSSLBindPort 993 zimbraPop3BindPort 110 zimbraPop3SSLBindPort 995 
    *** Running as zimbra user: /opt/zimbra/bin/zmprov -l ms mail.sbstests.com zimbraImapProxyBindPort 143 zimbraImapSSLProxyBindPort 993 zimbraPop3ProxyBindPort 110 zimbraPop3SSLProxyBindPort 995 
    *** Running as zimbra user: /opt/zimbra/bin/zmprov -l ms mail.sbstests.com zimbraMailPort 80 zimbraMailSSLPort 443 zimbraMailMode http
    Done
    Adding mail.sbstests.com to zimbraMailHostPool in default COS...
    Done
    Installing skins... 
    *** Running as zimbra user: /opt/zimbra/bin/zmprov -l mcf zimbraInstalledSkin ''
    *** Running as zimbra user: /opt/zimbra/bin/zmprov -l mcf +zimbraInstalledSkin sky
    *** Running as zimbra user: /opt/zimbra/bin/zmprov -l mcf +zimbraInstalledSkin bare
    *** Running as zimbra user: /opt/zimbra/bin/zmprov -l mcf +zimbraInstalledSkin sand
    *** Running as zimbra user: /opt/zimbra/bin/zmprov -l mcf +zimbraInstalledSkin rose
    *** Running as zimbra user: /opt/zimbra/bin/zmprov -l mcf +zimbraInstalledSkin steel
    *** Running as zimbra user: /opt/zimbra/bin/zmprov -l mcf +zimbraInstalledSkin froggy
    *** Running as zimbra user: /opt/zimbra/bin/zmprov -l mcf +zimbraInstalledSkin harvest
    *** Running as zimbra user: /opt/zimbra/bin/zmprov -l mcf +zimbraInstalledSkin vanilla
    *** Running as zimbra user: /opt/zimbra/bin/zmprov -l mcf +zimbraInstalledSkin lavender
    
    Done
    checking isEnabled zimbra-store
    zimbra-store is enabled
    checking isEnabled zimbra-mta
    zimbra-mta is enabled
    checking isEnabled zimbra-ldap
    zimbra-ldap is enabled
    checking isEnabled zimbra-store
    zimbra-store is enabled
    Setting MTA auth host...
    *** Running as zimbra user: /opt/zimbra/bin/zmprov -l ms mail.sbstests.com zimbraMtaAuthHost mail.sbstests.com
    Done
    checking isEnabled zimbra-ldap
    zimbra-ldap is enabled
    Setting TimeZone Preference...
    *** Running as zimbra user: /opt/zimbra/bin/zmprov -l mc default zimbraPrefTimeZoneId '(GMT-08.00) Pacific Time (US & Canada)'
    done.
    checking isEnabled zimbra-ldap
    zimbra-ldap is enabled
    Creating domain sbstests.com...
    *** Running as zimbra user: /opt/zimbra/bin/zmprov -l cd sbstests.com
    3e95d703-beed-4c48-8988-f8549b99f5f9
    *** Running as zimbra user: /opt/zimbra/bin/zmprov -l mcf zimbraDefaultDomainName sbstests.com
    Done
    checking isEnabled zimbra-store
    zimbra-store is enabled
    Creating user admin@sbstests.com...
    *** Running as zimbra user: /opt/zimbra/bin/zmprov -l cd sbstests.com
    ERROR: account.DOMAIN_EXISTS (domain already exists: sbstests.com)
    *** Running as zimbra user: /opt/zimbra/bin/zmprov
    b132bafc-bf13-4ec3-b473-f579b5798178
    Done
    Creating postmaster alias...
    *** Running as zimbra user: /opt/zimbra/bin/zmprov -l aaa admin@sbstests.com root@sbstests.com
    *** Running as zimbra user: /opt/zimbra/bin/zmprov -l aaa admin@sbstests.com postmaster@sbstests.com
    Done
    Creating user wiki@sbstests.com...
    *** Running as zimbra user: /opt/zimbra/bin/zmprov
    bebb4bf8-950d-4e7a-a79c-a9934b29ffee
    Done

Similar Threads

  1. Zimbra Pre-Install Questions
    By dczanik in forum Installation
    Replies: 1
    Last Post: 06-13-2007, 12:10 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •