Results 1 to 7 of 7

Thread: very sloooow installation (zimbra 6.6.0.1_GA_1816)

  1. #1
    Join Date
    Sep 2009
    Posts
    5
    Rep Power
    6

    Default very sloooow installation (zimbra 6.6.0.1_GA_1816)

    hi, I have a few problems here.

    first some data:

    my machine:
    - cpu amd athlon x2 4000+
    - 2gb ram
    - 2x 160gb sata (raid mirror)

    OS:
    centos 5.3 32bits

    zcs:
    6.0.1_GA_1816 32bits RHEL 5

    well I hope that's enough.
    Im trying to install this new zimbra from a fresh install, but it takes a lifetime doing anything, by example,
    "create ssl certificate...." takes 40minutes
    "setting up CA", takes about 45mins

    I don't know why is this so slowly, my dns works fine, my /etc/hosts are fine, I have a load average of 0.000, I have 1850mb of free ram, I installed all dependencies, I checked out all twice, any ideas?.

    thanks.

  2. #2
    phoenix is offline Zimbra Consultant & Moderator
    Join Date
    Sep 2005
    Location
    Vannes, France
    Posts
    23,587
    Rep Power
    58

    Default

    Installing Zimbra on CentOS5 is trivial and shouldn't take the time you're saying it does. Does this install happen to be on a VM?

    Quote Originally Posted by yakko View Post
    I don't know why is this so slowly, my dns works fine, my /etc/hosts are fine..
    Let's see some diagnostics to substantiate that claim, you'll find details of what's needed in the forums.
    Regards


    Bill


    Acompli: A new adventure for Co-Founder KevinH.

  3. #3
    Join Date
    Sep 2009
    Posts
    5
    Rep Power
    6

    Default

    I know install zimbra on centos is trivial, I never has a problem before. (is not my first time with zimbra and centos).

    I am not using a VM.

    I can't find anything wrong, all works fine

  4. #4
    phoenix is offline Zimbra Consultant & Moderator
    Join Date
    Sep 2005
    Location
    Vannes, France
    Posts
    23,587
    Rep Power
    58

    Default

    Quote Originally Posted by yakko View Post
    I can't find anything wrong, all works fine
    Post some details in this thread to show that it is correct, you'll find details in the forums of what's needed.
    Last edited by phoenix; 09-23-2009 at 10:51 PM.
    Regards


    Bill


    Acompli: A new adventure for Co-Founder KevinH.

  5. #5
    Join Date
    Sep 2009
    Posts
    5
    Rep Power
    6

    Default

    Code:
    [root@mail ~]# dig mydomain.cl MX
    
    ; <<>> DiG 9.3.4-P1 <<>> mydomain.cl MX
    ;; global options:  printcmd
    ;; Got answer:
    ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 17453
    ;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 1, ADDITIONAL: 2
    
    ;; QUESTION SECTION:
    ;mydomain.cl.                   IN      MX
    
    ;; ANSWER SECTION:
    mydomain.cl.            86400   IN      MX      10 mail.mydomain.cl.
    
    ;; AUTHORITY SECTION:
    mydomain.cl.            86400   IN      NS      ns.mydomain.cl.
    
    ;; ADDITIONAL SECTION:
    mail.mydomain.cl.       86400   IN      A       10.0.0.1
    ns.mydomain.cl.         86400   IN      A       10.0.0.1
    
    ;; Query time: 8 msec
    ;; SERVER: 10.0.0.1#53(10.0.0.1)
    ;; WHEN: Thu Sep 24 00:09:39 2009
    ;; MSG SIZE  rcvd: 99
    dns working fine.
    note: original domain and ip was changed to "mydomain.cl" and "10.0.0.1"
    responds ping, nslookup, etc all ok.

    Code:
    cat /etc/hosts
    # Do not remove the following line, or various programs
    # that require network functionality will fail.
    127.0.0.1               localhost.localdomain localhost
    10.0.0.1             mail.overseas.cl mail
    /etc/hosts

    Code:
    cat /etc/sysconfig/network
    NETWORKING=yes
    NETWORKING_IPV6=no
    HOSTNAME=mail.mydomain.cl
    GATEWAY=10.0.0.254
    hostname.

    Code:
    # df -h
    Filesystem            Size  Used Avail Use% Mounted on
    /dev/mapper/sistema-raiz
                          4.9G  1.6G  3.1G  34% /
    /dev/mapper/sistema-var
                           20G  5.6G   13G  31% /var
    /dev/mapper/sistema-usr
                          4.9G  938M  3.7G  20% /usr
    /dev/mapper/sistema-opt
                          9.9G  1.5G  8.0G  16% /opt
    /dev/mapper/sistema-tmp
                          2.0G   88M  1.8G   5% /tmp
    /dev/sda1              99M   31M   64M  33% /boot
    tmpfs                 997M     0  997M   0% /dev/shm
    filesystems has enough space.

    Code:
    # iptables -L
    Chain INPUT (policy ACCEPT)
    target     prot opt source               destination
    
    Chain FORWARD (policy ACCEPT)
    target     prot opt source               destination
    
    Chain OUTPUT (policy ACCEPT)
    target     prot opt source               destination
    any other data?

  6. #6
    Join Date
    Sep 2009
    Posts
    5
    Rep Power
    6

    Default

    finaly the server is installed, the webmail and web admin works fine, but the console still working very slow.

  7. #7
    Join Date
    Sep 2009
    Posts
    5
    Rep Power
    6

    Default

    any idea?... hello is anybody out there?

Similar Threads

  1. slapd message error
    By smoke in forum Administrators
    Replies: 7
    Last Post: 04-27-2008, 03:23 PM
  2. zmperditionctl start asking for password
    By k7sle in forum Administrators
    Replies: 32
    Last Post: 02-20-2008, 10:13 AM
  3. Can't start Zimbra!
    By zibra in forum Administrators
    Replies: 5
    Last Post: 03-22-2007, 11:34 AM
  4. 4.5 Upgrade failure
    By brained in forum Installation
    Replies: 9
    Last Post: 03-03-2007, 02:30 PM
  5. 3.1 on FC4 problems
    By cohnhead in forum Installation
    Replies: 8
    Last Post: 05-26-2006, 11:16 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •