I can't log in the web interface nor access emails through imap unless my firewall is stopped. The ldap initialization part of the install only worked after I turned off my firewall. I don't understand which rule I must add since I am already accepting connections on port 389? What should I change in my firewall to make zimbra work while it's turned on?

If it helps, everything is installed on a single machine (zimbra modules, firewall, ...) which has a static IP address (no routers or DHCP, it's in a colocation center)

# iptable -nvl
Chain INPUT (policy DROP 68 packets, 10595 bytes)
pkts bytes target prot opt in out source destination
1012 149K ACCEPT all -- lo * 127.0.0.0/8 127.0.0.0/8
0 0 ACCEPT icmp -- * * 0.0.0.0/0 0.0.0.0/0 icmp type 255
1028 73612 ACCEPT all -- eth0 * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED
0 0 ACCEPT tcp -- eth0 * 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:22 flags:0x16/0x02
6 336 ACCEPT tcp -- eth0 * 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:25 flags:0x16/0x02
1 60 ACCEPT tcp -- eth0 * 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:80 flags:0x16/0x02
0 0 ACCEPT tcp -- eth0 * 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:443 flags:0x16/0x02
0 0 ACCEPT tcp -- eth0 * 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:7071 flags:0x16/0x02
0 0 ACCEPT tcp -- eth0 * 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:7780 flags:0x16/0x02
0 0 ACCEPT tcp -- eth0 * 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:81 flags:0x16/0x02
0 0 ACCEPT tcp -- eth0 * 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:4343 flags:0x16/0x02
0 0 ACCEPT tcp -- eth0 * 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:389 flags:0x16/0x02
23 1380 ACCEPT tcp -- eth0 * 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:993 flags:0x16/0x02

Chain FORWARD (policy DROP 0 packets, 0 bytes)
pkts bytes target prot opt in out source destination
0 0 ACCEPT icmp -- * * 0.0.0.0/0 0.0.0.0/0 icmp type 255
0 0 ACCEPT all -- eth0 * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED

Chain OUTPUT (policy DROP 427 packets, 26708 bytes)
pkts bytes target prot opt in out source destination
1012 149K ACCEPT all -- * lo 127.0.0.0/8 127.0.0.0/8
0 0 ACCEPT icmp -- * * 0.0.0.0/0 0.0.0.0/0 icmp type 255
942 149K ACCEPT all -- * eth0 0.0.0.0/0 0.0.0.0/0