Results 1 to 4 of 4

Thread: Firewall ports and NAT

Hybrid View

  1. #1
    Join Date
    Oct 2005
    Posts
    1
    Rep Power
    10

    Default Firewall ports and NAT

    My server is behind a Linksys firewall. Which ports for I need to forward to the Zimbra server?

  2. #2
    Join Date
    Sep 2005
    Posts
    274
    Rep Power
    10

    Default check this out

    you should allow external ports (left side in the list) for services you'd like exposed: http://www.zimbra.com/forums/showthr...ighlight=ports

  3. #3
    Join Date
    Oct 2005
    Posts
    1
    Rep Power
    10

    Default Zimbra behind firewall

    I am also having a firewall problem. I have done a one to one nat with an external address mapped to the internal address that Zimbra is on. In Iptables I have made two rules. These rules are as follows:
    iptables -A INPUT -s external ip address -p 25 -j ACCEPT The same for port 110.
    From an internal network address I can telnet to port 25 and 110. From an external address telneting to the mapped external address I get no response. I have looked at http://www.zimbra.com/forums/showth...highlight=ports and was wondering if I should also make rules for the Zimbra mapped ports? Any other ideas, links, suggestions appreciated.

    Thank you

  4. #4
    Join Date
    Aug 2005
    Location
    San Mateo, CA
    Posts
    4,789
    Rep Power
    19

    Default

    You should only need 25/110 etc but you might want to try our internal service ports just to see if that works. Might help you narrow the problem.

Similar Threads

  1. Web Interface won't work outside NAT
    By toricred in forum Installation
    Replies: 5
    Last Post: 05-02-2007, 06:59 PM
  2. Firewall / NAT
    By dnewburg in forum Administrators
    Replies: 9
    Last Post: 01-31-2007, 08:39 AM
  3. Zimbra behind NAT firewall
    By amitbapat in forum Administrators
    Replies: 9
    Last Post: 01-09-2006, 12:55 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •