IRONMAIDEN 8.0.3 ported to FreeBSD

Ask questions about your setup or get help installing ZCS server (ZD section below).
Ishtar
Posts: 2
Joined: Sat Sep 13, 2014 3:12 am

IRONMAIDEN 8.0.3 ported to FreeBSD

Postby Ishtar » Mon May 13, 2013 6:50 am

After much googling and testing, I ended up uninstalling all the zimbra-* packages then pkgdb -Ff worked ;)
And no worries if it takes a bit of time, it's not like it's a critical deployment and I understand the work involved.
I'll try it again in a few days on another system, see how it goes and report back. Thanks again!


noan
Posts: 6
Joined: Fri Sep 12, 2014 11:41 pm

IRONMAIDEN 8.0.3 ported to FreeBSD

Postby noan » Mon May 20, 2013 9:39 pm

Hi Solko, thanks for your great port. Been using it for almost 2 years.
We are looking to upgrade to Ironmaiden from freebsd 8.2/helix combo. Any hints on doing this?
Ary Firman
Posts: 8
Joined: Sat Sep 13, 2014 3:12 am

IRONMAIDEN 8.0.3 ported to FreeBSD

Postby Ary Firman » Fri Jun 14, 2013 3:17 am

Zimbra 8.0.4 r5718 install report:
I have been testing zimbra 8.0.4 packages on Freebsd 9.1 and it has worked fine. Zimbra IPV6 is running smoothly by using:

# zmprov ms mail.mydomain.com zimbraIPMode both

# libexec/zmiptool

# zmcontrol restart

(Zimbra install without IPV6, then activate it later after zimbra successfully installed)----(zimbra behind NAT router)
But there are problem on OpenDKIM 2.8.0. It run well on IPV4 & mail is signed correctly but suddenly the service has stop after execute above command (other services not affected)

zimbra.log:

Jun 12 14:03:27 mail opendkim[27664]: exited with status 69, restarting

Jun 12 14:03:27 mail opendkim[27685]: OpenDKIM Filter: unknown socket type inet6

Jun 12 14:03:27 mail opendkim[27685]: OpenDKIM Filter: Unable to create listening socket on conn inet6

Jun 12 14:03:27 mail opendkim[27685]: smfi_opensocket() failed

Jun 12 14:03:27 mail opendkim[27664]: exited with status 69, restarting

Jun 12 14:03:27 mail opendkim[27686]: maximum restart count exceeded

Jun 12 14:03:27 mail opendkim[27664]: exited with status 69, restarting

Jun 12 14:03:27 mail opendkim[27664]: maximum restart count exceeded
I found some clue on:

http://www.zimbra.com/forums/administrators/59170-zimbra-8-opendkim-milter-issue.html

Bug 79377 – IPv6 issues with amavis/opendkim/milter/postfix since 8.0.2
Probably error on opendkim with inet6 socket, and follow instruction above does not help.

Still find out on how to solve OpenDKIM with IPV6, i will post back here when I found solution. Any help, highly appreciated.
cheers,
Ary Firman
root@mail:/root # uname -a

FreeBSD mail.mydomain.com 9.1-RELEASE-p3 FreeBSD 9.1-RELEASE-p3 #0: Mon Apr 29 18:27:25 UTC 2013 root@amd64 builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64


[zimbra@mail ~]$ zmcontrol -v

Release 8.0.4_GA_5718.FreeBSD_amd64 FreeBSD_amd64 FOSS edition.
Ary Firman
Posts: 8
Joined: Sat Sep 13, 2014 3:12 am

IRONMAIDEN 8.0.3 ported to FreeBSD

Postby Ary Firman » Wed Jun 19, 2013 7:30 am

Found solution for Zimbra 8.0.4 r5718 IPV6 with OpenDKIM
Don’t know how to explain but I guess there is something strange on ipv6 connection between OpenDKIM and Postfix
I’m running Dual Stack via HE.NET and follow instruction from Sebastian Marching OpenDKIM bug in Zimbra Collaboration Server - Open-Source, Physik & Politik
[QUOTE]/opt/zimbra/conf/opendkim.conf.in

changing "%%zimbraInetMode%%:8465@[%%zimbraLocalBindAddress%%]" to "inet:8465@[127.0.0.1][/QUOTE]
Restart zimbra, and opendkim service running now; but mail is still deferred with status:
[QUOTE]Content filter: scan:[::1]:10030

Size: 562

Reason: host ::1:[::1] said 451.4.7.1 service unavailable - try again later (in reply to mail command)[/QUOTE]
My /opt/zimbra/conf/opendkim-localnets.conf

[QUOTE]192.168.1.0/24

127.0.0.0/8

[fe80:1::]/64

[2001:470:36:99e::]/64

[::1]/128

[fe80:8::]/64

[/QUOTE]
Check /opt/zimbra/postfix/master.cf
[QUOTE]smtp inet n - n - - smtpd

-o content_filter=scan:[::1]:10030

465 inet n - n - - smtpd

-o content_filter=scan:[::1]:10030

submission inet n - n - - smtpd

-o content_filter=scan:[::1]:10030

………….

[::1]:10030 inet n - n - - smtpd[/QUOTE]
So, change [::1] with 127.0.0.1 (in master.cf.in) to force postfix listen to ipv4 localhost
[QUOTE]smtp inet n - n - - smtpd

-o content_filter=scan:127.0.0.1:10030

465 inet n - n - - smtpd

-o content_filter=scan:127.0.0.1:10030

(port 465 is legacy secure SMTP, no need to change unless you need it)

submission inet n - n - - smtpd

-o content_filter=scan:127.0.0.1:10030

…………

127.0.0.1:10030 inet n - n - - smtpd[/QUOTE]
Go to my laptop and disable IPV4, i can access ipv6 https webmail, try send email….and It works…..GMAIL server only show ipv6 mail server & my laptop IPV6 address on mail header with correct DKIM signature.
I haven’t installed zimbra with IPV6 only….yet, but I guess it should run as long as you still put 127.0.0.1 on /etc/hosts
cheers,
Ary Firman
solko
Advanced member
Advanced member
Posts: 93
Joined: Sat Sep 13, 2014 12:22 am

IRONMAIDEN 8.0.3 ported to FreeBSD

Postby solko » Fri Jun 21, 2013 1:35 am

i don't get it. i never get a notification about new forum message. and when i get one.. it is usually related to a message several months old :(. so i usually forget about forums alltogether.
i have never tested ipv6 extensively so i can't offer much help on this subject. sorry about that.
Ary Firman
Posts: 8
Joined: Sat Sep 13, 2014 3:12 am

IRONMAIDEN 8.0.3 ported to FreeBSD

Postby Ary Firman » Fri Jun 21, 2013 4:55 am

Yes Sir...you are missed my latest post, i have already found the solution. Still testing your packages for about a week now and if there are other problem then i will let you know (of course in this forum)......
Just curious, if you have already ported zimbra 8.0.4 final to FreeBSD
Well, you can put me on your list for loyal tester..........
cheers,
Ary Firman


My zimbra.log
[QUOTE]Jun 21 15:47:07 mail postfix/submission/smtpd[21014]: connect from unknown[2001:470:36:10b:7594:f2c:77b6:a487]

Jun 21 15:47:08 mail postfix/submission/smtpd[21014]: Anonymous TLS connection established from unknown[2001:470:36:10b:7594:f2c:77b6:a487]: TLSv1 with cipher ECDHE-RSA-AES256-SHA (256/256 bits)

Jun 21 15:47:08 mail saslauthd[2673]: zmauth: authenticating against elected url 'https://mail.mydomain.com:7071/service/admin/soap/' ...

Jun 21 15:47:08 mail saslauthd[2673]: auth_zimbra: ary auth OK
Jun 21 15:47:08 mail postfix/submission/smtpd[21014]: 8577A1D0: client=unknown[2001:470:36:10b:7594:f2c:77b6:a487], sasl_method=PLAIN, sasl_username=ary

Jun 21 15:47:08 mail postfix/cleanup[21018]: 8577A1D0: message-id=

Jun 21 15:47:08 mail postfix/qmgr[1404]: 8577A1D0: from=, size=973, nrcpt=1 (queue active)
Jun 21 15:47:08 mail postfix/dkimmilter/smtpd[21020]: connect from localhost[127.0.0.1]
Jun 21 15:47:10 mail postfix/smtp[21024]: 29BE51F6: to=, relay=gmail-smtp-in.l.google.com[2607:f8b0:400e:c01::1b]:25, delay=1.6, delays=0/0.01/0.68/0.93, dsn=2.0.0, status=sent (250 2.0.0 OK 1371804430 ez5si2508152pab.309 - gsmtp)

Jun 21 15:47:10 mail postfix/qmgr[1404]: 29BE51F6: removed[/QUOTE]
solko
Advanced member
Advanced member
Posts: 93
Joined: Sat Sep 13, 2014 12:22 am

IRONMAIDEN 8.0.3 ported to FreeBSD

Postby solko » Tue Jul 02, 2013 7:07 am

[quote user="Ary Firman"]

Just curious, if you have already ported zimbra 8.0.4 final to FreeBSD

[/QUOTE]

yes, r5738. i have not tested the installation though.

as i was saying.. please, write me an email, poke me on skype.. if you require a new version!

the build process is very easy nowadays.. give it a try :-).

thank you.
Ary Firman
Posts: 8
Joined: Sat Sep 13, 2014 3:12 am

IRONMAIDEN 8.0.3 ported to FreeBSD

Postby Ary Firman » Sun Jul 14, 2013 8:18 pm

Great...finally did come out. I really appreciate your effort to ported zimbra 8 final release for FreeBSD....Thank You.
I have been upgraded Zimbra R5718 to Zimbra R5738, but it still need to make small changes on postfix content_filter (posted above). I did Fresh Install, I've also upgraded all dependency based on builddeps (perl, openjdk etc) but i've no luck.



Sorry for my lack of knowledge...
Maybe there is something glitch on my DNS settings,....and I do have to learn more about internal ports (8456,10024,10026,10030 etc), Zimbra user privilege (after install) on /opt/zimbra, or deal with Amavisd instead of not to enable OpenDKIM.
But hey.......it's still run with 127.0.0.1, and i'am trying to find out why ipv6 localhost packets did not routed between them.
Perhaps, i should install zimbra on linux and pay attention on all config file...
cheers,
Ary Firman
cnav
Posts: 4
Joined: Sat Sep 13, 2014 2:26 am

IRONMAIDEN 8.0.3 ported to FreeBSD

Postby cnav » Wed Jul 17, 2013 3:16 am

solko, to satisfy my curiosity, please.

did you not think about creating a port in FreeBSD tree ?
solko
Advanced member
Advanced member
Posts: 93
Joined: Sat Sep 13, 2014 12:22 am

IRONMAIDEN 8.0.3 ported to FreeBSD

Postby solko » Wed Jul 17, 2013 3:53 am

[quote user="Ary Firman"]Great...finally did come out. I really appreciate your effort to ported zimbra 8 final release for FreeBSD....Thank You.

Perhaps, i should install zimbra on linux and pay attention on all config file...

[/QUOTE]

exactly my thinking!

remember, i am not a zimbra guru. i am just a guy who try to make it run on freebsd :).

Return to “Installation and Upgrade”

Who is online

Users browsing this forum: No registered users and 7 guests