broken install on fedora core 4??

Ask questions about your setup or get help installing ZCS server (ZD section below).
rmvg
Outstanding Member
Outstanding Member
Posts: 208
Joined: Fri Sep 12, 2014 9:54 pm

broken install on fedora core 4??

Postby rmvg » Sun Sep 11, 2005 4:00 pm

Actually everthing seemed to install ok on fedora core 4 however when i tried to stop sendmail with chkconfig sendmail off it gives me errors about command not found later zimbra seems to kill sendmail during install anyway.
When i reboot it seems to take along time and i get a couple of errors about imapd and sendmail shared libraies ssh something something failing on boot up
I am going to try a reinstall of everything because this is my first fedora install (I use FreeBSD normally) and i used a seperate drive for swap something not mentioned in the quick install. Also i am behind a ipf default to deny firewall but can open any ports needed by zimbra most should already be open as i already run a email/imap/squirrellmail/postfix/tls/blah/blah server on my bsd box
I will keep the group updated but expect the same problem on reinstall so any help would be thankfull in other words PLEASE HELP
I read the previous thread about /etc/hosts and mine looks like this
# Do not remove the following line, or various programs

# that require network functionality will fail.

127.0.0.1 localhost.localdomain localhost

192.168.0.100 mx1.canmail.org canmail
I get this doing a zmcontrol status
[root@mx1 rmvg]# su - zimbra [zimbra@mx1 ~]$ zmcontrol status

Calling GetServiceInfoRequest (mx1.canmail.org)
RESPONSE: (Zimbra::Mon::serviceInfo)

host

ip 192.168.0.100

name mx1.canmail.org



[root@mx1 rmvg]# Sep 11 07:35:40 mx1 gconfd (root-6236): starting (version 2.10.0), pid 6236 user 'root'

bash: syntax error near unexpected token `('

[root@mx1 rmvg]# Sep 11 07:35:40 mx1 gconfd (root-6236): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position


the output of my zimbra log
Sep 11 07:25:34 mx1 zimbramon[1937]: 1937:crit: doStart

Sep 11 07:25:35 mx1 zimbramon[1937]: 1937:crit: STARTING ldap

Sep 11 07:25:35 mx1 zimbramon[1937]: 1937:info: start service ldap

Sep 11 07:25:35 mx1 zimbramon[1937]: 1937:info: start app ldap

Sep 11 07:25:35 mx1 zimbramon[1937]: 1937:info: Starting child ldap: (20050911072535)

Sep 11 07:29:05 mx1 zimbramon[1937]: 1937:crit: STARTING services

Sep 11 07:29:05 mx1 zimbramon[1937]: 1937:crit: doStartup

Sep 11 07:29:06 mx1 zimbramon[2497]: 2497:info: Zimbra Monitor startup: 2497

Sep 11 07:29:06 mx1 zimbramon[2497]: 2497:info: Process 2481 not found - removing /opt/zimbra/zimbramon/FIFO/zm.pid

Sep 11 07:29:06 mx1 zimbramon[2526]: 2526:crit: Status monitor startup

Sep 11 07:29:06 mx1 zimbramon[2527]: 2527:crit: Creating soap server on port 7777
found this in /var/log/messages
Sep 11 07:25:24 mx1 fstab-sync[1911]: removed all generated mount points

Sep 11 07:25:27 mx1 fstab-sync[1921]: added mount point /media/cdrecorder for /dev/hdc

Sep 11 07:25:28 mx1 su(pam_unix)[1936]: session opened for user zimbra by (uid=0)

Sep 11 07:26:04 mx1 gpm[1835]: *** info [mice.c(1766)]:

Sep 11 07:26:04 mx1 gpm[1835]: imps2: Auto-detected intellimouse PS/2

Sep 11 07:29:28 mx1 su(pam_unix)[1936]: session closed for user zimbra

Sep 11 07:29:46 mx1 gdm(pam_unix)[3436]: session opened for user rmvg by (uid=0)

Sep 11 07:29:47 mx1 gconfd (rmvg-3533): starting (version 2.10.0), pid 3533 user 'rmvg'

Sep 11 07:29:47 mx1 gconfd (rmvg-3533): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0

Sep 11 07:29:47 mx1 gconfd (rmvg-3533): Resolved address "xml:readwrite:/home/rmvg/.gconf" to a writable configuration source at position 1

Sep 11 07:29:47 mx1 gconfd (rmvg-3533): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 2

Sep 11 07:29:53 mx1 gconfd (rmvg-3533): Resolved address "xml:readwrite:/home/rmvg/.gconf" to a writable configuration source at position 0

Sep 11 07:30:02 mx1 crond(pam_unix)[3678]: session opened for user zimbra by (uid=0)

Sep 11 07:30:04 mx1 crond(pam_unix)[3678]: session closed for user zimbra

Sep 11 07:32:15 mx1 su(pam_unix)[4516]: authentication failure; logname= uid=500 euid=0 tty=pts/1 ruser=rmvg rhost= user=zimbra

Sep 11 07:32:29 mx1 su(pam_unix)[4519]: authentication failure; logname= uid=500 euid=0 tty=pts/1 ruser=rmvg rhost= user=zimbra

Sep 11 07:32:38 mx1 su(pam_unix)[4590]: authentication failure; logname= uid=500 euid=0 tty=pts/1 ruser=rmvg rhost= user=zimbra

Sep 11 07:32:48 mx1 su(pam_unix)[4729]: authentication failure; logname= uid=500 euid=0 tty=pts/1 ruser=rmvg rhost= user=zimbra

Sep 11 07:33:00 mx1 su(pam_unix)[4731]: session opened for user root by (uid=500)

Sep 11 07:33:10 mx1 su(pam_unix)[4747]: session opened for user zimbra by (uid=0)

Sep 11 07:35:33 mx1 su(pam_unix)[4747]: session closed for user zimbra

Sep 11 07:35:40 mx1 gconfd (root-6236): starting (version 2.10.0), pid 6236 user 'root'

Sep 11 07:35:40 mx1 gconfd (root-6236): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0

Sep 11 07:35:40 mx1 gconfd (root-6236): Resolved address "xml:readwrite:/root/.gconf" to a writable configuration source at position 1

Sep 11 07:35:40 mx1 gconfd (root-6236): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 2

Sep 11 07:40:01 mx1 crond(pam_unix)[7740]: session opened for user zimbra by (uid=0)

Sep 11 07:40:02 mx1 crond(pam_unix)[7740]: session closed for user zimbra

Sep 11 07:50:02 mx1 crond(pam_unix)[11131]: session opened for user zimbra by (uid=0)

Sep 11 07:50:04 mx1 crond(pam_unix)[11131]: session closed for user zimbra

Sep 11 07:58:29 mx1 su(pam_unix)[14069]: session opened for user zimbra by (uid=0)

Sep 11 07:59:44 mx1 su(pam_unix)[14069]: session closed for user zimbra

Sep 11 08:00:01 mx1 crond(pam_unix)[15153]: session opened for user zimbra by (uid=0)

Sep 11 08:00:03 mx1 crond(pam_unix)[15153]: session closed for user zimbra


14319KevinH
Ambassador
Ambassador
Posts: 4558
Joined: Fri Sep 12, 2014 9:52 pm

broken install on fedora core 4??

Postby 14319KevinH » Sun Sep 11, 2005 4:06 pm

Take a look at this post:

You">http://www.zimbra.com/forums/showpost.php?p=83&postcount=16
You
may have a similar issue. Did you try to run chkconfig after a "su - root" ie was it in your path?
9428Sean
Posts: 6
Joined: Fri Sep 12, 2014 9:54 pm

broken install on fedora core 4??

Postby 9428Sean » Sun Sep 11, 2005 4:07 pm

You should be able to do the FC3 install on a FC4 machine, at least I was eventually able to get that to work the other day. Make sure that you have shutdown mysql and that it is not running before you try the install. And it wouldn't hurt to shutdown sendmail too, but I don't think that should matter.
Before installing you might also want to shut off selinux too by editing the /etc/sysconfig/selinux file and setting "SELINUX=permissive". Then reboot.
Good luck,

Sean
mikeygstl
Posts: 13
Joined: Fri Sep 12, 2014 9:59 pm

broken install on fedora core 4??

Postby mikeygstl » Thu Dec 08, 2005 1:50 pm

12124springnet
Posts: 7
Joined: Fri Sep 12, 2014 9:54 pm

broken install on fedora core 4??

Postby 12124springnet » Sun Mar 05, 2006 12:18 pm

[zimbra@www bin]$ ./zmcontrol start

Host http://www.sportsgametime.com">http://http://www.sportsgametime.com">http://http://www.sportsgametime.com">http://http://www.sportsgametime.com

[zimbra@www bin]$ ./zmcontrol stop

Host http://www.sportsgametime.com">http://http://www.sportsgametime.com">http://http://www.sportsgametime.com">http://http://www.sportsgametime.com

Stopping antispam...Done

Stopping antivirus...Done

Stopping ldap...Done

Stopping logger...Done

Stopping mailbox...FAILED

Error: tomcat not running (pid 13357), stale pid file?

Error: assertion '-r /opt/zimbra/conf/my.cnf' failed


Stopping mta...Done

Stopping snmp...Done

Stopping spell...Done

[zimbra@www bin]$ service tomcat start

-bash: service: command not found

[zimbra@www bin]$ ./tomcat start

ERROR: service.FAILURE (system failure: getDirectContext) (cause: javax.naming.CommunicationException localhost:389)

ERROR: service.FAILURE (system failure: getDirectContext) (cause: javax.naming.CommunicationException localhost:389)

[zimbra@www bin]$ ./zmcontrol start

Host http://www.sportsgametime.com">http://http://www.sportsgametime.com">http://http://www.sportsgametime.com">http://http://www.sportsgametime.com

[zimbra@www bin]$
14319KevinH
Ambassador
Ambassador
Posts: 4558
Joined: Fri Sep 12, 2014 9:52 pm

broken install on fedora core 4??

Postby 14319KevinH » Sun Mar 05, 2006 8:40 pm

[quote user="12124springnet"][zimbra@www bin]$ ./zmcontrol start

Host http://www.sportsgametime.com">http://http://www.sportsgametime.com">http://http://www.sportsgametime.com">http://http://www.sportsgametime.com

[zimbra@www bin]$ ./zmcontrol stop

Host http://www.sportsgametime.com">http://http://www.sportsgametime.com">http://http://www.sportsgametime.com">http://http://www.sportsgametime.com

Stopping antispam...Done

Stopping antivirus...Done

Stopping ldap...Done

Stopping logger...Done

Stopping mailbox...FAILED

Error: tomcat not running (pid 13357), stale pid file?

Error: assertion '-r /opt/zimbra/conf/my.cnf' failed


Stopping mta...Done

Stopping snmp...Done

Stopping spell...Done

[zimbra@www bin]$ service tomcat start

-bash: service: command not found

[zimbra@www bin]$ ./tomcat start

ERROR: service.FAILURE (system failure: getDirectContext) (cause: javax.naming.CommunicationException localhost:389)

ERROR: service.FAILURE (system failure: getDirectContext) (cause: javax.naming.CommunicationException localhost:389)

[zimbra@www bin]$ ./zmcontrol start

Host http://www.sportsgametime.com">http://http://www.sportsgametime.com">http://http://www.sportsgametime.com">http://http://www.sportsgametime.com

[zimbra@www bin]$[/QUOTE]


Please don't cross post. One post per problem is plenty.

Return to “Installation and Upgrade”

Who is online

Users browsing this forum: ANAYAALI2019 and 4 guests