unable to send or receive mail

Ask questions about your setup or get help installing ZCS server (ZD section below).
damanmokha
Posts: 7
Joined: Mon Dec 29, 2014 1:24 pm

unable to send or receive mail

Postby damanmokha » Tue Dec 30, 2014 5:40 am

Hi,



Done but same problem


User avatar
jorgedlcruz
Zimbra Alumni
Zimbra Alumni
Posts: 2782
Joined: Thu May 22, 2014 4:47 pm

unable to send or receive mail

Postby jorgedlcruz » Tue Dec 30, 2014 6:13 am

Did you use the su - zimbra? Not su zimbra, without the less simbol, is important to execute su - zimbra and then zmcontrol restart.


So, please try this workaround:


su - zimbra
zmcontrol stop
exit
/opt/zimbra/libexec/zmfixperms --verbose --extended
su - zimbra
zmcontrol start
zmcontrol status

Do you have SElinux active?


Best regards

Jorge de la Cruz https://jorgedelacruz.es
Systems Engineer at Veeam Software https://www.veeam.com/
damanmokha
Posts: 7
Joined: Mon Dec 29, 2014 1:24 pm

unable to send or receive mail

Postby damanmokha » Tue Dec 30, 2014 7:53 am

Yeah i tried su -zimbra. i tried it again but mta was still not available i have edited the selinux congif file but it sitll shows me disabled. selinux file



SELINUX=permissive

SELINUXTYPE=targeted

SETLOCALDEFS=0|1

REQUIREUSERS=0|1

AUTORELABEL=0|1
aamit.rhce
Posts: 39
Joined: Sat Sep 13, 2014 2:23 am

unable to send or receive mail

Postby aamit.rhce » Tue Dec 30, 2014 10:09 pm

Hi Damanmokha,


Can you please capture /var/log/zimbra.log file error during restarting zimbra services (# zmcontrol restart)


and send us Error text file.

phoenix
Ambassador
Ambassador
Posts: 26698
Joined: Fri Sep 12, 2014 9:56 pm
Location: Liverpool, England

unable to send or receive mail

Postby phoenix » Wed Dec 31, 2014 2:13 am

[quote user="damanmokha"]Yeah i tried su -zimbra. i tried it again but mta was still not available i have edited the selinux congif file but it sitll shows me disabled. selinux file

SELINUX=permissive
SELINUXTYPE=targeted
SETLOCALDEFS=0|1
REQUIREUSERS=0|1
AUTORELABEL=0|1[/quote]That output show that SElinux is in permissive mode not disabled, you should disable it. The initial output indicates you have a DNS problem and the output of your host file shows that the entry for you server is incorrect. I'd suggest you read the Split DNS article again (the link has already been provided earlier) and modify your hosts file. WHen you've made the modification to your hosts file and fully disabled SElinux you should run all the commands in the 'Verify......' section of the Split DNS article to confirm your configuration is correct. Do you also have a firewall on this server? If you do, do you actually have a DNS server configured behind this firewall?


I'd also suggest you have a problem with your external DNS records, this is the output of a ping:


ping mail.askcentos.com



PING mail.askcentos.com (63.142.248.216) 56(84) bytes of data.
64 bytes from 63.142.248.216: icmp_seq=1 ttl=54 time=157 ms
64 bytes from 63.142.248.216: icmp_seq=2 ttl=54 time=179 ms
64 bytes from 63.142.248.216: icmp_seq=3 ttl=54 time=163 ms
64 bytes from 63.142.248.216: icmp_seq=4 ttl=54 time=171 ms
64 bytes from 63.142.248.216: icmp_seq=5 ttl=54 time=158 ms


You can also use one of the many internet sites that check and diagnose DNS problems, see what they have to say about your records.


Regards

Bill

Rspamd: A high performance spamassassin replacement

Per ardua ad astra

Return to “Installation and Upgrade”

Who is online

Users browsing this forum: No registered users and 7 guests