[SOLVED] Upgrade 8.7.1 convertd fails to start

Ask questions about your setup or get help installing ZCS server (ZD section below).
User avatar
JDunphy
Outstanding Member
Outstanding Member
Posts: 478
Joined: Fri Sep 12, 2014 11:18 pm
Location: Victoria, BC
ZCS/ZD Version: 8.7.11_P14 RHEL6 Network Edition
Contact:

[SOLVED] Upgrade 8.7.1 convertd fails to start

Postby JDunphy » Thu Oct 27, 2016 2:43 pm

8.6 to 8.7 to 8.7.1

Problem: symlink to keyview is missing after update of 8.7.1 from 8.7.0 on centos 6
Resolution: see below

1) convert will fail to start during the upgrade from 8.7.0 providing this message in the log
mod_convert: init failed: /opt/zimbra/keyview/ExportSDK/bin/mwxsr.so: cannot open shared object file: No such file or directory

2) A 8.7.0 machine has this structure

% cd /opt/zimbra
% ls -l key
keyview@ keyview-10.13.0.0/
% ls -l keyview
lrwxrwxrwx 1 root root 29 Oct 26 13:46 keyview -> /opt/zimbra/keyview-10.13.0.0

The 8.7.1 machine has this structure (note: missing the symlink)

cd /opt/zimbra
% ls -ldt keyview*
drwxr-xr-x 6 root root 4096 Oct 25 03:03 keyview-10.13.0.0

Fix:
# ln -s /opt/zimbra/keyview-10.13.0.0 keyview

Then restart zimbra. Convertd comes up.

HTH others that find that convertd doesn't start after their upgrade from 8.7.0 to 8.7.1
Last edited by JDunphy on Fri Oct 28, 2016 2:03 pm, edited 3 times in total.


User avatar
JDunphy
Outstanding Member
Outstanding Member
Posts: 478
Joined: Fri Sep 12, 2014 11:18 pm
Location: Victoria, BC
ZCS/ZD Version: 8.7.11_P14 RHEL6 Network Edition
Contact:

Re: Upgrade 8.7.1 convertd fails to start (Solved)

Postby JDunphy » Thu Oct 27, 2016 3:13 pm

Was hoping profile would allow me to put zmcontrol -v but it truncates that.

I am running: Release 8.7.1_GA_1670.RHEL6_64_20161025035121 RHEL6_64 NETWORK edition.
User avatar
jorgedlcruz
Zimbra Alumni
Zimbra Alumni
Posts: 2773
Joined: Thu May 22, 2014 4:47 pm

Re: Upgrade 8.7.1 convertd fails to start (SOLVED)

Postby jorgedlcruz » Sat Oct 29, 2016 10:05 am

Hello,
Thank you for your help, official wiki now:

Best regards
Jorge de la Cruz https://jorgedelacruz.es
Systems Engineer at Veeam Software https://www.veeam.com/
sergio.bergamini.7
Posts: 23
Joined: Thu Apr 16, 2015 11:39 am
Location: Brazil
ZCS/ZD Version: Zimbra Open Source 8.8.10

Re: [SOLVED] Upgrade 8.7.1 convertd fails to start

Postby sergio.bergamini.7 » Wed Nov 02, 2016 2:11 pm

Hi Jorge, I followed the oficial wiki and when I tried to execute the command, I received this message

zimbra@mail:~$ zmconvertdctl start
zmconvertdctl: command not found

And I Always have the message bellow after restart Zimbra

Stopping convertd...skipped.
/opt/zimbra/bin/zmconvertctl missing or not executable.

Any sugestion?

Best,

Sergio Bergamini
User avatar
DualBoot
Elite member
Elite member
Posts: 1073
Joined: Mon Apr 18, 2016 8:18 pm
Location: Earth
ZCS/ZD Version: ZCS FLOSS - 8.7.11 Mutli servers

Re: [SOLVED] Upgrade 8.7.1 convertd fails to start

Postby DualBoot » Wed Nov 02, 2016 6:16 pm

can you post the output of zmcontrol -v
User avatar
JDunphy
Outstanding Member
Outstanding Member
Posts: 478
Joined: Fri Sep 12, 2014 11:18 pm
Location: Victoria, BC
ZCS/ZD Version: 8.7.11_P14 RHEL6 Network Edition
Contact:

Re: [SOLVED] Upgrade 8.7.1 convertd fails to start

Postby JDunphy » Wed Nov 02, 2016 6:53 pm

I think its because the message shows the following was typed.

Code: Select all

zmconvertdctl start


instead of

Code: Select all

zmconvertctl start


Notice the 'd'. The other message could be the shared library missing but difficult to tell at this point.
sergio.bergamini.7
Posts: 23
Joined: Thu Apr 16, 2015 11:39 am
Location: Brazil
ZCS/ZD Version: Zimbra Open Source 8.8.10

Re: [SOLVED] Upgrade 8.7.1 convertd fails to start

Postby sergio.bergamini.7 » Wed Nov 02, 2016 8:04 pm

Hi JDunphy, both command I have same problem

zimbra@mail:/root$ zmconvertctl start
zmconvertctl: command not found

zimbra@mail:/root$ zmcontrol -v
Release 8.7.1.GA.1670.UBUNTU14.64 UBUNTU14_64 FOSS edition.

When I try to find command zmconvert, nothing is found
zimbra@mail:/root$ find /opt/zimbra/ -name zmconvert*

But Zimbra apparently is work fine, send and receive e-mails...

Best,

Sergio Bergamini
phoenix
Ambassador
Ambassador
Posts: 26325
Joined: Fri Sep 12, 2014 9:56 pm
Location: Liverpool, England

Re: [SOLVED] Upgrade 8.7.1 convertd fails to start

Postby phoenix » Wed Nov 02, 2016 8:10 pm

sergio.bergamini.7 wrote:zimbra@mail:/root$ zmcontrol -v
Release 8.7.1.GA.1670.UBUNTU14.64 UBUNTU14_64 FOSS edition.
That is the open source version of ZCS, it doesn't have convertd as that's an NE feature. You should always post the installed version of ZCS when you post on these forums.
Regards

Bill

Rspamd: A high performance spamassassin replacement

If you'd like to see this implemented in a future version of ZCS then please vote on Bugzilla entries 97706 & 108168
sergio.bergamini.7
Posts: 23
Joined: Thu Apr 16, 2015 11:39 am
Location: Brazil
ZCS/ZD Version: Zimbra Open Source 8.8.10

Re: [SOLVED] Upgrade 8.7.1 convertd fails to start

Postby sergio.bergamini.7 » Wed Nov 02, 2016 8:19 pm

Sorry for that Ambassador. Can I ignore the message below? It's occurs when I restart Zimbra services.

Stopping convertd...skipped.
/opt/zimbra/bin/zmconvertctl missing or not executable.


Sergio Bergamini
phoenix
Ambassador
Ambassador
Posts: 26325
Joined: Fri Sep 12, 2014 9:56 pm
Location: Liverpool, England

Re: [SOLVED] Upgrade 8.7.1 convertd fails to start

Postby phoenix » Wed Nov 02, 2016 8:22 pm

sergio.bergamini.7 wrote:Sorry for that Ambassador. Can I ignore the message below? It's occurs when I restart Zimbra services.
Of course you can ignore it, this has already been mentioned once or twice in the forums.
Regards

Bill

Rspamd: A high performance spamassassin replacement

If you'd like to see this implemented in a future version of ZCS then please vote on Bugzilla entries 97706 & 108168

Return to “Installation and Upgrade”

Who is online

Users browsing this forum: No registered users and 7 guests